OFFER 1:
Band Machine

for the production of brass and copper wool 

We offer a complete production line of 17 machines, 
single machines will also be sold.

Output of each machine:
approx. 20 kg brass or copper wool per hour

Power demand: 5,5 kW

  • Used Band Machine for the production of brass and copper wool from Bolz Maschinenbau


OFFER 2:
WEBO II


Aggregates: 2
Wire diameter: 3.10
Speed: 250 - 280 kg/h


Processing of the wire in one operation
Steel wool of the highest quality
Wire fractures are virtually excluded

solid steel construction for quiet and vibration-free
   running of the machine
large grooved wheels to reduce the bending resistance of the wire
lubricating device on the knife bar for lubrication of the wire and the knives
72 stainless knife holder with a knife width of 120 mm
rugged worm gear with a efficiency of 98 %
hardened and grinded worm wheels, (well worm wheels made of bronze)
   for a low power requirement
suction device for dust and fumes
free delivery of steel foundations, therefore a short and easy assembly with you

Technical data / WEB0 II
Aggregates:                       2
Wire diameter:                   3.10 mm
Output (approx) at an operating speed of 110 m/min: 250 - 280 kg/h
Power consumption:         110 kW
Number of knife holder:    72
Wire passage:                    1
Operators:                          3
Wool quality:                    10 - 000
Total machine length:      15 m
Total machine weight:     13500 kg


OFFER 3:

Tearing and Rolling Machine


the tearing and rolling machine serves to steel wool strips
   on certain lengths to tear down and to roll

It can be produced pads of 6 - 50 g and 50 - 120 mm wide be produced

the machine is equipped with a clutch-brake combination,
   for exact tearing of the wool strip
the roll machine is fixed at the tearing machine, so the machine
   can be taken in / out of operation
the drive is over 2.2 kW motor. Over regulating wheels can the speed
   of the machine to be continuously adjusted.
he roll machine is equipped with a wear-resistant rubber band.

Technical data / Tearing and Rolling Machine
Roller width:                   50 - 120 mm
Roller weight                  6 - 50 g
Output:                           80 - 120 pcs / min
Power consumption:       2.2 kW
Operator:                        1
Total machine length:    3.20 m
Total machine weight:   850 kg

OFFER 4:
WEBO 8/120 steel wool machine, new

for a wire diameter  of 3.25 mm, power 280 - 380 kg per hour

with the power consumption 132 kW

The condition is new.

WEBO I second-hand steel wool machine from Bolz Maschinenbau

OFFER 5: 
WEBO chopper – Häcksler, second hand

Production: 200Kg/h
Power consumption: Kw 25; 50 Hz
Floor Space required: 2,10 x 2,00 x 2,80 m
Weight: 1200kg

The steel wool chopper we developed has a special suction system that prevents fires. 
It is used to shred steel wool, copper and aluminum wool into the desired powder size.
The steel wool can be fed directly from the steel wool machine or through coiled bobbins.

The condition is as good as new.

WEBO II second-hand steel wool machine from Bolz Maschinenbau

OFFER 6:
„Poland“ Mixer from „DOZAMET“ for preparation of wet mix

Machine No: 32000-001
Production date: 1999
Aprox. Capacity: 200 kg of dry mix
Power: 23.5 kW

OFFER: 7
Horizontal hydraulic Extruder
for production of coated welding electrodes OERLIKON, type WEP 220

Hydraulic unit with maximum pressure: 285 bar
Maximum extruding pressure: 220 tons
Two exchanged cylinders each with following dimensions:
diam. 180 mm, length 1050 mm, volume 26 liters
Max. Capacity of wet mix: 14 liters/min

OFFER: 8
Transverse belt for extruder WEP 220 „Oerlikon“ AB1 R02

Conveyor with grinding and printing systems for extruder WEP 220 „Oerlikon“

OFFER: 9
Cut wire feeding Unit „Oerlikon“ EDA 101

Wire length: 225 – 450 mm
Capacity for 350 mm: 65 – 1550 per minute

OFFER: 10
Transverse belt AB1 R02 for extruder CEP 141 „Oerlikon“

Conveyor System with grinding and printing accesories BM2 003 „Oerlikon“

OFFER: 11
Three Static Resistance furnaces for baking of basic and special

Type: „СДО-10.12,5.10/5-И2“
Production year: 1990
Nominal power: 78.3 kW
Permissible power: 85.8 kW
Needed Voltage of grid: 380/220 V
Nominal max. temperature: 500 °C
Work Atmosphere: air
Uniformity of temperature: ±15 °C
PLCs: exists from year 2002.
Four different programs are possible,
each one from maximum 20 steps.

OFFER: 12
Static Resistance furnaces for baking of basic and special

Type: SNOL 2000/550
Production year: 2005
Nominal power: 65 kW
Needed Voltage of grid: 380 V
Nominal max. temperature: 550 °C
Work Atmosphere: air
Uniformity of temperature: ±5 °C
PLCs: exists from year 2005.
Four different programs are possible, each one from maximum 20 steps.

For more information contact us by e-mail:
info@werner-bolz.com

or call us:
Fon: +49 (0) 76 63 - 20 52

 
Contact
40 years werner bolz

If you want more product information, please contact us!

 

Or call us on:

+49 (0)7663 - 20 52